Characterization of Viticultural Terroirs using a Simple Field Model Based on Soil Depth – II. Validation of the Grape Yield and Berry Quality in the Anjou Vineyard (France)

Soil and climate are major constituents of the French notion of Terroir. This concept implies that there is a strong relationship between the composition of the grape, the characteristics of the wine and the territory of production. To study this link, a new method of characterization of the Terroir, including geological and pedological factors, was investigated. It uses a field model based on depth and clay content of soil, together with the degree of weathering of the parent rock. Consequently, for every type of parent rock belonging to a given geologic stage, there are a series of soils that show different stages of pedological evolution. According to the model, three kinds of soils are distinguished with regards to the weathering intensity of the parent rock, that are named weakly weathered rock (WWR), moderately weathered rock (MWR) and strongly weathered rock (SWR). By hypothesis, each soil type is considered as a homogeneous unit for vine production from the viewpoint of ecophysiological factors. Each terroir unit defined by this method is called a Basic Terroir Unit (BTU). To validate this hypothesis, experimental plots planted with Chenin and Cabernet Franc vines were studied over three consecutive seasons (2000–2002), in the Anjou vineyard (Loire Valley – France). The major BTUs developed on the two most important geological systems of Anjou (Brioverian and Ordovician–Devonian), were studied. Results showed that the berries of vines cultivated in WWR were significantly smaller, richer in sugars and anthocyanins and had a Total Phenolic Index higher than those of the vines cultivated in SWR. They also had a lower titratable acidity. Cabernet Franc vines cultivated in MWR had berries with sugar and anthocyanin contents but also total phenolics very close to those of WWR. With Chenin vines there was a good relationship between the global pool of free aromas of berries and the BTU type. The study showed significant relationships between the quality of grapes and the measured values of several ecophysiological variables such as the water supply regime or the timing of budburst.     

The effect of salinity on the survival,growth, sporulation and infection of Phytophthora ramorum

Phytophthora ramorum has been found in waterways outside infested nurseries, but little is known about its behavior in water. This study examined the effect of salinity on survival, growth, sporulation, and infection. P. ramorum survival and growth was negatively correlated with salt concentration (range of 0–45 g l⁻¹), but showed a level of tolerance even at 45 g l⁻¹. No sporangia were observed in cultures with higher than 20 g l⁻¹ of salt and zoospores were not released from sporangia above 14 g l⁻¹. Water sources with different salinity were used to understand the environment where P. ramorum can survive and infect host material. Water from natural bodies and water amended with different salt concentrations were added to P. ramorum-infested sand and baited with rhododendron leaf disks. Infection decreased with increasing salt concentration and increased with higher initial concentration of P. ramorum. This research helps to better understand the effects of water quality on survival and infectivity of P. ramorum, expanding the potential survey range.     

Salt-induced phase separation can effectively remove the acetonitrile from the protein sample after the preparative RP-HPLC

Acetonitrile (ACN)–water system is one of the most commonly used mobile phases in practical reverse-phase high-performance liquid chromatography (RP-HPLC). However, a higher concentration of ACN (normally greater than 60% (v/v)) is required to elute the target protein from the RP-HPLC column in which, further steps to remove the ACN from the protein samples are demanded. It has been demonstrated that the phase separation occurring under the sub-zero temperature could easily remove the majority of ACN from the effluent of RP-HPLC. Recently, we found that the comparable phase separation could be achieved by adding a small amount of proper salts, such as K₂HPO₄ and KH₂PO₄, and the phase separation could take place effectively at 4 °C where the protein-purification processes were usually carried out. In addition, the pH value of the solution could be maintained properly by using potassium phosphate buffer (pH 7.0). With an optimized condition for this salt-induced phase separation, we demonstrated that greater than 60% of ACN could be easily removed; on the other hand, more than 90% of water-soluble protein could be successfully recovered within five hours.     

Efficient tuning of potential parameters for liquid–solid interactions

Spherical and cylindrical water droplets on silicon surface are studied to tune the silicon–oxygen interaction. We use molecular dynamics simulations to estimate the contact angle of two different shaped droplets. We found that the cylindrical droplets are independent of the line tension as their three phases curvature is equal zero. Additionally, we compare an analytical model, taking into account or not the Tolman length and we show that for spherical small size droplets, this length is important to be included, in contrast to cylindrical droplets in which the influence of the Tolman length is negligible. We demonstrate that the usual convenient way to exclude linear tension in the general case can give wrong results. Here, we consider cylindrical droplets, since their contact angle does not depend on the droplet size in the range of few to 10ths of nanometres. The droplets are stabilised due to the periodic boundary conditions. This allows us to propose a new parameterisation for nanoscale droplets, which is independent the size of the droplets or its shape, minimising at the same time the calculation procedure. With the proposed methodology, we can extract the epsilon parameter of the interaction potential between a liquid and a solid from the nanoscaled molecular simulation with only as input the macrosized experimental wetting angle for a given temperature.     

Water movement through Quercus rubra I. Leaf water potential and conductance during polycyclic growth

Two experiments examined simultaneous changes in leaf area (A_L), root length (L_r), stomatal conductance (g_s), leaf water potential (Ψ_L), transpiration and hydraulic plant conductance per unit leaf area (G) during the first three shoot cycles of northern red oak (Quercus rubra L.) grown under favourable and controlled conditions. Each shoot cycle consisted of bud swell, stem elongation, leaf expansion and rest; roots grew almost continuously. The g_s of all leaves decreased substantially while leaves of the newest flush were expanding and increased modestly when seedling leaf area remained constant. Overall, g_s decreased. The Ψ_L of mature leaves decreased during leaf expansion and increased by an equivalent amount during intervening periods. Possible explanations for the paired changes in g_s and Ψ_L are considered. Changes in G closely paralleled those of canopy g_s. These parallel changes during polycyclic seedling growth should act to keep seedling Ψ_L relatively constant as plant size increases and thereby help prevent Ψ_L from dropping to levels that would cause runaway embolism.     

Effect of back reactions in the S-cycle on photosynthesis in very weak light

Photosynthesis in light which is so weak that excitation rates are comparable to the decay rates of S-states is modelled. It is found that oxygen evolution rate varies in a non-linear way with Photosystem II excitation rate in this region, but asymptotically approaches a linear relationship (with a slope of one oxygen molecule per four excitations) as excitation rate increases. The asymptote gives an intercept (zero oxygen evolution rate) on the excitation rate axis. The question is raised, whether this model is compatible with photoautotrophy in a red alga found at 268 m depth and able to carry out photosynthesis in extremely weak light. It is found that no unorthodox mechanisms for the S-cycle in this alga have to be assumed to explain its performance.     

Photoinhibition of radish (Raphanus sativus L) seed germination: control of growth potential by cell-wall yielding in the embryo

The biophysical mechanism underlying photoinhibition of radish (Raphanus sativus L.) seed germination was investigated using three cultivars differing in sensitivity to continuous irradiation with far-red light (high-irradiance reaction of phytochrome). Sensitivity of germination to the inhibitory action of light was assessed by probing germination under osmotic stress (incubation in media of low water potentials adjusted with polyethylene glycol 6000) and expressed in terms of ‘germination potential’ (positive value of the water potential at which germination is inhibited by 50%). Far-red light decreases the germination potential to various degrees in the different cultivars, reflecting the light-sensitivity of germination in water. Removal of the seed coat increases the germination potential by a constant amount in darkness and light. It is concluded that germination depends on the expansive force of the embryo which can be drastically diminished by far-red light. Seed-coat constraint and expansive force of the embryo interact additively on the level of the germination potential. Photoinhibition of germination was accompanied by an inhibition of water uptake into the seed. Analysis of seed water relations showed that osmotic pressure and turgor assumed higher levels in photoinhibited seeds, compared to seeds germinating in darkness, while the water potential was close to zero under both conditions. Far-red light produced a shift (to less negative values) in the curve relating water-uptake rate to external water potential, i.e. a reduction in the driving force for water uptake. It is concluded that photoinhibition of germination results from the maintenance of a high threshold of cell-wall extensibility in the embryo.     

The mechanism of water-stress-induced embolism in two species of chaparral shrubs

The mechanism of water-stress-induced embolism of xylem was investigated in Malosma laurina and Heteromeles arbutifolia, two chaparral shrub species of southern California. We tested the hypothesis that the primary cause of xylem dysfunction in these species during dehydration was the pulling of air through the pores in the cell walls of vessels (pores in pit membranes) as a result of high tensions on xylem water. First, we constructed vulnerability-to-embolism curves for (i) excised branches that were increasingly dehydrated in the laboratory and (ii) hydrated branches exposed to increasing levels of external air pressure. Branches of M. laurina that were dehydrated became 50% embolized at a xylem pressure potential of -1.6 MPa, which is equal in magnitude but opposite in sign to the +1.6 MPa of external air pressure that caused 50% embolism in hydrated stems. Dehydrated and pressurized branches of H. arbutifolia reached a 50% level of embolism at -6.0 and +6.4 MPa, respectively. Secondly, polystyrene spheres ranging in diameter from 20 to 149 nm were perfused through hydrated stem segments to estimate the pore size in the vessel cell walls (pit membranes) of the two species. A 50% or greater reduction in hydraulic conductivity occurred in M. laurina at perfusions of 30, 42, 64 and 82 nm spheres and in H. arbutifolia at perfusions of 20 and 30 nm spheres. Application of the capillary equation to these pore diameters predicted 50% embolism at xylem tensions of -2.2 MPa for M. laurina and -6.7 MPa for H. arbutifolia, which are within 0.7 MPa of the actual values. Our results suggest that the size of pores in pit membranes may be a factor in determining both xylem efficiency and vulnerability to embolism in some chaparral species. H. arbutifolia, with smaller pores and narrower vessels, withstands lower water potentials but has lower transport efficiency. M. laurina, with wider pores and wider vessels, has a greater transport efficiency but requires a deeper root system to help avoid catastro-phically low water potentials.     

The need for biological assessment of water quality: Australian perspective

Abstract Biological assessment of water quality in Australia is entering a stage of rapid development largely because of the inclusion of biological indicators in water quality guidelines and growing concern for ecological values. Approaches to water quality assessment include toxicity testing, use of biomarkers and several methods using community structure. For assessment diverse organisms such as fish, algae and (the most commonly used) macro-invertebrates are used. Interaction of data analysis with methods of data collection requires co-ordinated research on both fronts. Recent developments in the use of multivariate statistics to produce models for predicting water quality are likely to be useful in Australia. Much innovative work is still needed in Australia on the use of algae and fish, defining tolerance categories and establishing monitoring programmes performed in time-frames equivalent to those in use for physical and chemical methods.